add label scrolling in Bluetooth menu

- Add calibration submenu with three options: Cancel (default), Calibrate, and Clear
- Cancel returns to main menu to prevent accidental calibration
- Calibrate runs system_setZeroAngle() and displays "Calibrated" confirmation
- Clear runs system_clearZeroAngle() and displays "Cleared" confirmation
- Use LVGL timer for non-blocking 1-second confirmation messages
- Center confirmation messages both horizontally and vertically
- Use larger font (montserrat_16) for better readability
- Remove "Back" button from volume control page
- Center volume control elements vertically on screen
- Improve overall menu navigation and visual consistency

🤖 Generated with [Claude Code](https://claude.com/claude-code)

Co-Authored-By: Claude <noreply@anthropic.com>

.claude/settings.local.json

@@ -22,7 +22,10 @@
       "Bash(curl -s http://127.0.0.1:5000/)",
       "Bash(./build_web_macos.sh:*)",
       "Bash(./dist/ESP32_Flasher.app/Contents/MacOS/ESP32_Flasher:*)",
-      "Bash(where:*)"
+      "Bash(where:*)",
+      "Bash(idf.py size-components:*)",
+      "Bash(find:*)",
+      "Bash(git log:*)"
     ],
     "deny": []
   }

.vscode/settings.json

@@ -4,7 +4,7 @@
     "idf.openOcdConfigs": [
         "board/esp32-wrover-kit-3.3v.cfg"
     ],
-    "idf.portWin": "COM4",
+    "idf.portWin": "COM14",
     "idf.toolsPathWin": "C:\\Users\\Brent.Perteet\\.espressif",
     "idf.flashType": "UART",
     "files.associations": {

main/bt_app.c

@@ -328,32 +328,14 @@ static esp_err_t bt_add_discovered_device(esp_bd_addr_t bda, const char *name)
         return ESP_ERR_INVALID_ARG;
     }
 
-    // Check if device is already known
+    // Don't save discovered devices to NVS - they're not paired yet!
-    if (system_isDeviceKnown(bda)) {
+    // They will only be saved to NVS when successfully connected.
+    // Just log that we discovered this device.
     char bda_str[18];
-        ESP_LOGD(BT_AV_TAG, "Device %s (%s) already known, skipping", 
+    ESP_LOGI(BT_AV_TAG, "Discovered device: %s (%s)",
              name, bda2str(bda, bda_str, sizeof(bda_str)));
+
     return ESP_OK;
-    }
-    
-    // Create paired_device_t structure for discovered device
-    paired_device_t device;
-    memcpy(device.bda, bda, ESP_BD_ADDR_LEN);
-    strncpy(device.name, name, DEVICE_NAME_MAX_LEN - 1);
-    device.name[DEVICE_NAME_MAX_LEN - 1] = '\0';
-    device.last_connected = 0; // Never connected, set to 0
-    
-    // Save to NVS
-    esp_err_t ret = system_savePairedDevice(&device);
-    if (ret == ESP_OK) {
-        char bda_str[18];
-        ESP_LOGI(BT_AV_TAG, "Added discovered device to NVS: %s (%s)", 
-                 device.name, bda2str(device.bda, bda_str, sizeof(bda_str)));
-    } else {
-        ESP_LOGE(BT_AV_TAG, "Failed to save discovered device: %s", esp_err_to_name(ret));
-    }
-    
-    return ret;
 }
 
 static esp_err_t __attribute__((unused)) nvs_update_connection_timestamp(esp_bd_addr_t bda)
@@ -559,9 +541,14 @@ static void filter_inquiry_scan_result(esp_bt_gap_cb_param_t *param)
         }
     }
 
+    // Log device details for debugging
+    ESP_LOGI(BT_AV_TAG, "  CoD: 0x%"PRIx32", Valid: %d, RSSI: %"PRId32", EIR: %p",
+             cod, esp_bt_gap_is_valid_cod(cod), rssi, eir);
+
     /* search for device with MAJOR service class as "rendering" in COD */
     if (!esp_bt_gap_is_valid_cod(cod) ||
             !(esp_bt_gap_get_cod_srvc(cod) & ESP_BT_COD_SRVC_RENDERING)) {
+        ESP_LOGI(BT_AV_TAG, "  Device filtered out - not an audio rendering device");
         return;
     }
 
@@ -592,9 +579,13 @@ static void bt_app_gap_cb(esp_bt_gap_cb_event_t event, esp_bt_gap_cb_param_t *pa
     switch (event) {
     /* when device discovered a result, this event comes */
     case ESP_BT_GAP_DISC_RES_EVT: {
-        if (s_a2d_state == APP_AV_STATE_DISCOVERING) {
+        // Log ALL discovered devices for debugging
+        char bda_str[18];
+        ESP_LOGI(BT_AV_TAG, "*** Device discovered: %s (A2DP state: %d)",
+                 bda2str(param->disc_res.bda, bda_str, 18), s_a2d_state);
+
+        // Process the result regardless of A2DP state
         filter_inquiry_scan_result(param);
-        }
         break;
     }
     /* when discovery state changed, this event comes */
@@ -602,6 +593,10 @@ static void bt_app_gap_cb(esp_bt_gap_cb_event_t event, esp_bt_gap_cb_param_t *pa
         if (param->disc_st_chg.state == ESP_BT_GAP_DISCOVERY_STOPPED) {
             ESP_LOGI(BT_AV_TAG, "Device discovery stopped.");
             s_device_list.discovery_active = false;
+
+            // Notify GUI that discovery is complete so it can refresh the display
+            system_notifyAll(EM_EVENT_BT_DISCOVERY_COMPLETE);
+
             // Don't automatically connect - wait for user selection
             // Only connect if we're in DISCOVERED state (manually triggered by bt_connect_device)
             if (s_a2d_state == APP_AV_STATE_DISCOVERED) {
@@ -1104,8 +1099,28 @@ static void bt_app_av_state_connecting_hdlr(uint16_t event, void *param)
             s_a2d_state =  APP_AV_STATE_CONNECTED;
             s_media_state = APP_AV_MEDIA_STATE_IDLE;
 
+            // Check if device is already paired, if not, add it as paired
+            if (!system_isDeviceKnown(s_peer_bda)) {
+                ESP_LOGI(BT_AV_TAG, "Device not in paired list, adding: %s", s_peer_bdname);
+                paired_device_t new_device;
+                memcpy(new_device.bda, s_peer_bda, ESP_BD_ADDR_LEN);
+                strncpy(new_device.name, (char*)s_peer_bdname, DEVICE_NAME_MAX_LEN - 1);
+                new_device.name[DEVICE_NAME_MAX_LEN - 1] = '\0';
+                new_device.last_connected = (uint32_t)(esp_timer_get_time() / 1000000);
+                system_savePairedDevice(&new_device);
+
+                // Update the device in the GUI list to show it as paired
+                for (int i = 0; i < s_device_list.count; i++) {
+                    if (memcmp(s_device_list.devices[i].bda, s_peer_bda, ESP_BD_ADDR_LEN) == 0) {
+                        s_device_list.devices[i].is_paired = true;
+                        ESP_LOGI(BT_AV_TAG, "Marked device as paired in GUI list: %s", s_peer_bdname);
+                        break;
+                    }
+                }
+            } else {
                 // Update connection timestamp for this device
                 system_updateConnectionTimestamp(s_peer_bda);
+            }
         } else if (a2d->conn_stat.state == ESP_A2D_CONNECTION_STATE_DISCONNECTED) {
             ESP_LOGI(BT_AV_TAG, "Connection failed.");
             // If device was previously connected (known device), don't retry automatically
@@ -1445,6 +1460,7 @@ static void bt_app_task_handler(void *arg)
             if (notifiedBits & EM_EVENT_BT_REFRESH) {
                 ESP_LOGI(BT_AV_TAG, "BT Refresh event received");
                 bt_clear_discovered_devices();
+                bt_start_discovery(); // Start new discovery after clearing
                 // Notify GUI that refresh is done - could add completion event if needed
             }
             if (notifiedBits & EM_EVENT_BT_CONNECT) {
@@ -1803,6 +1819,33 @@ void bt_clear_discovered_devices(void) {
     ESP_LOGI(BT_AV_TAG, "Cleared discovered devices, kept %d paired devices", new_count);
 }
 
+void bt_clear_all_devices(void) {
+    s_device_list.count = 0;
+    ESP_LOGI(BT_AV_TAG, "Cleared all devices from device list");
+}
+
+void bt_disconnect_current_device(void) {
+    if (s_a2d_state == APP_AV_STATE_CONNECTED) {
+        ESP_LOGI(BT_AV_TAG, "Disconnecting from current device");
+
+        // Stop media first if playing
+        if (s_media_state == APP_AV_MEDIA_STATE_STARTED) {
+            esp_a2d_media_ctrl(ESP_A2D_MEDIA_CTRL_SUSPEND);
+            s_media_state = APP_AV_MEDIA_STATE_STOPPING;
+        }
+
+        // Disconnect A2DP
+        esp_a2d_source_disconnect(s_peer_bda);
+        s_a2d_state = APP_AV_STATE_DISCONNECTING;
+    } else if (s_a2d_state == APP_AV_STATE_CONNECTING) {
+        ESP_LOGI(BT_AV_TAG, "Cancelling connection attempt");
+        // Cancel connection attempt
+        s_a2d_state = APP_AV_STATE_UNCONNECTED;
+    } else {
+        ESP_LOGI(BT_AV_TAG, "No device connected (state: %d)", s_a2d_state);
+    }
+}
+
 void bt_volume_up(void) {
     if (!s_volume_control_available) {
         ESP_LOGW(BT_AV_TAG, "Volume control not available");

main/bt_app.h

@@ -69,7 +69,7 @@ void bt_app_task_shut_down(void);
 void bt_app_init(void);
 
 /* Bluetooth device management for GUI */
-#define MAX_BT_DEVICES 20
+#define MAX_BT_DEVICES 8  // Reduced from 20 to save memory
 #define MAX_BT_NAME_LEN 32
 
 typedef struct {
@@ -100,6 +100,12 @@ bool bt_connect_device(int device_index);
 /* Clear discovered devices (keep paired devices) */
 void bt_clear_discovered_devices(void);
 
+/* Clear all devices from the device list (paired and discovered) */
+void bt_clear_all_devices(void);
+
+/* Disconnect from currently connected device */
+void bt_disconnect_current_device(void);
+
 /* Volume control functions */
 void bt_volume_up(void);
 void bt_volume_down(void);

main/gpio.h

@@ -4,9 +4,11 @@
 // Define keypad buttons
 #define PIN_NUM_BUTTON_0        36
 #define PIN_NUM_BUTTON_1        39
-#define PIN_NUM_LED_1           32
+#define PIN_NUM_LED_0           32
-#define PIN_NUM_LED_2           33
+#define PIN_NUM_LED_1           33
+#define PIN_NUM_LED_2           25
 #define PIN_NUM_nON				26
+#define PIN_NUM_CHARGE_STATUS   2
 
 
 // Define GPIO pins

main/main.c

@@ -104,20 +104,47 @@ static inline float LPF_Update(LowPassFilter *f, float input) {
  * STATIC FUNCTION DEFINITIONS
  ********************************/
 
+// Helper function to set LED with verification
+static void set_led_level(gpio_num_t pin, uint32_t level)
+{
+    esp_err_t err = gpio_set_level(pin, level);
+    if (err != ESP_OK) {
+        ESP_LOGE(TAG, "Failed to set GPIO %d to %lu: %s", pin, level, esp_err_to_name(err));
+    }
+}
+
 static void init_gpio(void)
 {
     gpio_config_t io_conf;
 
+    // Reset GPIO peripheral to clear any SPI/peripheral configurations
+    gpio_reset_pin(PIN_NUM_LED_0);
+    gpio_reset_pin(PIN_NUM_LED_1);
+    gpio_reset_pin(PIN_NUM_LED_2);
 
     // Configure output GPIO
-    io_conf.pin_bit_mask = (1ULL << PIN_NUM_LED_1) | (1ULL << PIN_NUM_LED_2);
+    io_conf.pin_bit_mask = (1ULL << PIN_NUM_LED_0) | (1ULL << PIN_NUM_LED_1) | (1ULL << PIN_NUM_LED_2);
     io_conf.mode = GPIO_MODE_OUTPUT;
     io_conf.intr_type = GPIO_INTR_DISABLE;
     io_conf.pull_up_en = GPIO_PULLUP_DISABLE;
     io_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
     gpio_config(&io_conf);
 
+    // Set initial state
+    gpio_set_level(PIN_NUM_LED_0, 0);
+    gpio_set_level(PIN_NUM_LED_1, 0);
+    gpio_set_level(PIN_NUM_LED_2, 0);
 
+    ESP_LOGI(TAG, "LED pins configured: %d, %d, %d", PIN_NUM_LED_0, PIN_NUM_LED_1, PIN_NUM_LED_2);
+
+
+    // Configure charge status input GPIO
+    io_conf.pin_bit_mask = (1ULL << PIN_NUM_CHARGE_STATUS);
+    io_conf.mode = GPIO_MODE_INPUT;
+    io_conf.intr_type = GPIO_INTR_DISABLE;
+    io_conf.pull_up_en = GPIO_PULLUP_DISABLE;
+    io_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
+    gpio_config(&io_conf);
 
 
 #if 1
@@ -286,6 +313,10 @@ void app_main(void)
     bt_app_init();
     print_heap_info("POST_BLUETOOTH");
 
+    gpio_set_level(PIN_NUM_LED_0, 1);
+            gpio_set_level(PIN_NUM_LED_1, 1);
+            gpio_set_level(PIN_NUM_LED_2, 1);
+            
     gui_start();
     print_heap_info("POST_GUI");
     gpio_set_level(PIN_NUM_LED_2, 1);
@@ -326,6 +357,23 @@ void app_main(void)
 #else
     while (1)
     {
+        // Read charge status and update system
+        bool is_charging = gpio_get_level(PIN_NUM_CHARGE_STATUS);
+        system_setChargeStatus(is_charging);
+
+        if (is_charging)
+        {
+            gpio_set_level(PIN_NUM_LED_0, 0);
+            gpio_set_level(PIN_NUM_LED_1, 1);
+            gpio_set_level(PIN_NUM_LED_2, 0);
+        }
+        else
+        {
+            gpio_set_level(PIN_NUM_LED_0, 1);
+            gpio_set_level(PIN_NUM_LED_1, 0);
+            gpio_set_level(PIN_NUM_LED_2, 0);
+        }
+
         system_processNvsRequests();
         vTaskDelay(pdMS_TO_TICKS(10));
     }

main/system.c

@@ -22,6 +22,7 @@ void system_init(void)
     _systemState.zeroAngle = 0.0f;
     _systemState.primaryAxis = PRIMARY_AXIS;
     _systemState.pairedDeviceCount = 0;
+    _systemState.isCharging = false;
 
 	_systemEvent = xEventGroupCreate();
 
@@ -57,6 +58,22 @@ float system_getAngle(void)
     return angle;
 }
 
+void system_setChargeStatus(bool charging)
+{
+    xSemaphoreTake(_eventManager.mutex, portMAX_DELAY);
+    _systemState.isCharging = charging;
+    xSemaphoreGive(_eventManager.mutex);
+}
+
+bool system_getChargeStatus(void)
+{
+    bool charging;
+    xSemaphoreTake(_eventManager.mutex, portMAX_DELAY);
+    charging = _systemState.isCharging;
+    xSemaphoreGive(_eventManager.mutex);
+    return charging;
+}
+
 void system_setZeroAngle(void)
 {
     xSemaphoreTake(_eventManager.mutex, portMAX_DELAY);
@@ -356,9 +373,9 @@ void system_processNvsRequests(void) {
         }
         xSemaphoreGive(_eventManager.mutex);
 
-        request.response_ready = true;
+        // Send the result directly as the notification value (not a pointer)
         if (request.requestor) {
-            xTaskNotify(request.requestor, (uint32_t)&request, eSetValueWithOverwrite);
+            xTaskNotify(request.requestor, (uint32_t)request.result, eSetValueWithOverwrite);
         }
     }
 }
@@ -396,8 +413,8 @@ esp_err_t system_savePairedDevice(const paired_device_t *device) {
     if (xQueueSend(_nvsRequestQueue, &request, pdMS_TO_TICKS(NVS_TIMEOUT_MS)) == pdTRUE) {
         uint32_t notification;
         if (xTaskNotifyWait(0, UINT32_MAX, &notification, pdMS_TO_TICKS(NVS_TIMEOUT_MS)) == pdTRUE) {
-            nvs_request_t *response = (nvs_request_t*)notification;
+            // notification contains the result directly (not a pointer)
-            return response->result;
+            return (esp_err_t)notification;
         }
     }
     return ESP_ERR_TIMEOUT;
@@ -425,8 +442,8 @@ esp_err_t system_removePairedDevice(esp_bd_addr_t bda) {
     if (xQueueSend(_nvsRequestQueue, &request, pdMS_TO_TICKS(NVS_TIMEOUT_MS)) == pdTRUE) {
         uint32_t notification;
         if (xTaskNotifyWait(0, UINT32_MAX, &notification, pdMS_TO_TICKS(NVS_TIMEOUT_MS)) == pdTRUE) {
-            nvs_request_t *response = (nvs_request_t*)notification;
+            // notification contains the result directly (not a pointer)
-            return response->result;
+            return (esp_err_t)notification;
         }
     }
     return ESP_ERR_TIMEOUT;
@@ -464,8 +481,8 @@ esp_err_t system_updateConnectionTimestamp(esp_bd_addr_t bda) {
     if (xQueueSend(_nvsRequestQueue, &request, pdMS_TO_TICKS(NVS_TIMEOUT_MS)) == pdTRUE) {
         uint32_t notification;
         if (xTaskNotifyWait(0, UINT32_MAX, &notification, pdMS_TO_TICKS(NVS_TIMEOUT_MS)) == pdTRUE) {
-            nvs_request_t *response = (nvs_request_t*)notification;
+            // notification contains the result directly (not a pointer)
-            return response->result;
+            return (esp_err_t)notification;
         }
     }
     return ESP_ERR_TIMEOUT;
@@ -480,3 +497,19 @@ const paired_device_t* system_getPairedDevices(size_t *count) {
 
     return (const paired_device_t*)_systemState.pairedDevices;
 }
+
+esp_err_t system_clearAllPairedDevices(void) {
+    // Directly clear in-memory state and save to NVS
+    xSemaphoreTake(_eventManager.mutex, portMAX_DELAY);
+    _systemState.pairedDeviceCount = 0;
+    esp_err_t ret = nvs_save_devices_internal(_systemState.pairedDevices, 0);
+    xSemaphoreGive(_eventManager.mutex);
+
+    if (ret == ESP_OK) {
+        ESP_LOGI("system", "Cleared all paired devices from NVS");
+    } else {
+        ESP_LOGE("system", "Failed to clear paired devices: %s", esp_err_to_name(ret));
+    }
+
+    return ret;
+}

main/system.h

@@ -52,6 +52,9 @@ typedef struct SystemState_s
     paired_device_t pairedDevices[MAX_PAIRED_DEVICES];
     size_t pairedDeviceCount;
 
+    // Charge status
+    bool isCharging;
+
 } SystemState_t;
 
 
@@ -67,6 +70,7 @@ typedef struct SystemState_s
 #define EM_EVENT_BT_CONNECT (1UL<<3)
 #define EM_EVENT_VOLUME_UP  (1UL<<4)
 #define EM_EVENT_VOLUME_DOWN (1UL<<5)
+#define EM_EVENT_BT_DISCOVERY_COMPLETE (1UL<<6)
 // …add more event bit-masks here…
 
 typedef struct {
@@ -83,6 +87,9 @@ ImuData_t system_getImuData(void);
 int system_getPrimaryAxis(void);
 float system_getAngle(void);
 
+void system_setChargeStatus(bool charging);
+bool system_getChargeStatus(void);
+
 void system_setZeroAngle(void);
 void system_clearZeroAngle(void);
 float system_getZeroAngle(void);
@@ -133,6 +140,7 @@ bool system_isDeviceKnown(esp_bd_addr_t bda);
 esp_err_t system_getKnownDeviceCount(size_t *count);
 esp_err_t system_updateConnectionTimestamp(esp_bd_addr_t bda);
 const paired_device_t* system_getPairedDevices(size_t *count);
+esp_err_t system_clearAllPairedDevices(void);
 
 
 #define NVS_TIMEOUT_MS 5000

sdkconfig

@@ -247,7 +247,7 @@ CONFIG_IDF_TOOLCHAIN_GCC=y
 CONFIG_IDF_TARGET_ARCH_XTENSA=y
 CONFIG_IDF_TARGET_ARCH="xtensa"
 CONFIG_IDF_TARGET="esp32"
-CONFIG_IDF_INIT_VERSION="5.5.1"
+CONFIG_IDF_INIT_VERSION="5.4.1"
 CONFIG_IDF_TARGET_ESP32=y
 CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000
 
@@ -2369,7 +2369,7 @@ CONFIG_LV_ATTRIBUTE_MEM_ALIGN_SIZE=1
 # Enable built-in fonts
 #
 CONFIG_LV_FONT_MONTSERRAT_8=y
-# CONFIG_LV_FONT_MONTSERRAT_10 is not set
+CONFIG_LV_FONT_MONTSERRAT_10=y
 CONFIG_LV_FONT_MONTSERRAT_12=y
 CONFIG_LV_FONT_MONTSERRAT_14=y
 # CONFIG_LV_FONT_MONTSERRAT_16 is not set

sdkconfig.old

@@ -1,6 +1,6 @@
 #
 # Automatically generated file. DO NOT EDIT.
-# Espressif IoT Development Framework (ESP-IDF) 5.3.1 Project Configuration
+# Espressif IoT Development Framework (ESP-IDF) 5.4.1 Project Configuration
 #
 CONFIG_SOC_BROWNOUT_RESET_SUPPORTED="Not determined"
 CONFIG_SOC_TWAI_BRP_DIV_SUPPORTED="Not determined"
@@ -91,12 +91,14 @@ CONFIG_SOC_GPIO_OUT_RANGE_MAX=33
 CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0xEF0FEA
 CONFIG_SOC_GPIO_CLOCKOUT_BY_IO_MUX=y
 CONFIG_SOC_GPIO_CLOCKOUT_CHANNEL_NUM=3
+CONFIG_SOC_GPIO_SUPPORT_HOLD_IO_IN_DSLP=y
 CONFIG_SOC_I2C_NUM=2
 CONFIG_SOC_HP_I2C_NUM=2
 CONFIG_SOC_I2C_FIFO_LEN=32
 CONFIG_SOC_I2C_CMD_REG_NUM=16
 CONFIG_SOC_I2C_SUPPORT_SLAVE=y
 CONFIG_SOC_I2C_SUPPORT_APB=y
+CONFIG_SOC_I2C_SUPPORT_10BIT_ADDR=y
 CONFIG_SOC_I2C_STOP_INDEPENDENT=y
 CONFIG_SOC_I2S_NUM=2
 CONFIG_SOC_I2S_HW_VERSION_1=y
@@ -111,6 +113,7 @@ CONFIG_SOC_I2S_SUPPORTS_ADC_DAC=y
 CONFIG_SOC_I2S_SUPPORTS_ADC=y
 CONFIG_SOC_I2S_SUPPORTS_DAC=y
 CONFIG_SOC_I2S_SUPPORTS_LCD_CAMERA=y
+CONFIG_SOC_I2S_MAX_DATA_WIDTH=24
 CONFIG_SOC_I2S_TRANS_SIZE_ALIGN_WORD=y
 CONFIG_SOC_I2S_LCD_I80_VARIANT=y
 CONFIG_SOC_LCD_I80_SUPPORTED=y
@@ -120,6 +123,7 @@ CONFIG_SOC_LEDC_HAS_TIMER_SPECIFIC_MUX=y
 CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y
 CONFIG_SOC_LEDC_SUPPORT_REF_TICK=y
 CONFIG_SOC_LEDC_SUPPORT_HS_MODE=y
+CONFIG_SOC_LEDC_TIMER_NUM=4
 CONFIG_SOC_LEDC_CHANNEL_NUM=8
 CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=20
 CONFIG_SOC_MCPWM_GROUPS=2
@@ -172,6 +176,8 @@ CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=2
 CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=64
 CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4
 CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y
+CONFIG_SOC_LP_TIMER_BIT_WIDTH_LO=32
+CONFIG_SOC_LP_TIMER_BIT_WIDTH_HI=16
 CONFIG_SOC_TOUCH_SENSOR_VERSION=1
 CONFIG_SOC_TOUCH_SENSOR_NUM=10
 CONFIG_SOC_TOUCH_SAMPLE_CFG_NUM=1
@@ -214,6 +220,7 @@ CONFIG_SOC_PM_SUPPORT_RC_FAST_PD=y
 CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD=y
 CONFIG_SOC_PM_SUPPORT_MODEM_PD=y
 CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED=y
+CONFIG_SOC_PM_MODEM_PD_BY_SW=y
 CONFIG_SOC_CLK_APLL_SUPPORTED=y
 CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED=y
 CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256=y
@@ -236,10 +243,11 @@ CONFIG_SOC_PHY_COMBO_MODULE=y
 CONFIG_SOC_EMAC_RMII_CLK_OUT_INTERNAL_LOOPBACK=y
 CONFIG_IDF_CMAKE=y
 CONFIG_IDF_TOOLCHAIN="gcc"
+CONFIG_IDF_TOOLCHAIN_GCC=y
 CONFIG_IDF_TARGET_ARCH_XTENSA=y
 CONFIG_IDF_TARGET_ARCH="xtensa"
 CONFIG_IDF_TARGET="esp32"
-CONFIG_IDF_INIT_VERSION="5.3.1"
+CONFIG_IDF_INIT_VERSION="5.4.1"
 CONFIG_IDF_TARGET_ESP32=y
 CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000
 
@@ -273,6 +281,10 @@ CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
 # CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
 # CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
 # CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
+
+#
+# Log
+#
 # CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
@@ -281,6 +293,14 @@ CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
 # CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
 CONFIG_BOOTLOADER_LOG_LEVEL=3
 
+#
+# Format
+#
+# CONFIG_BOOTLOADER_LOG_COLORS is not set
+CONFIG_BOOTLOADER_LOG_TIMESTAMP_SOURCE_CPU_TICKS=y
+# end of Format
+# end of Log
+
 #
 # Serial Flash Configurations
 #
@@ -336,6 +356,7 @@ CONFIG_ESP_ROM_HAS_SW_FLOAT=y
 CONFIG_ESP_ROM_USB_OTG_NUM=-1
 CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM=-1
 CONFIG_ESP_ROM_SUPPORT_DEEP_SLEEP_WAKEUP_STUB=y
+CONFIG_ESP_ROM_HAS_OUTPUT_PUTC_FUNC=y
 
 #
 # Serial flasher config
@@ -377,6 +398,7 @@ CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
 # CONFIG_PARTITION_TABLE_SINGLE_APP is not set
 # CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
 # CONFIG_PARTITION_TABLE_TWO_OTA is not set
+# CONFIG_PARTITION_TABLE_TWO_OTA_LARGE is not set
 CONFIG_PARTITION_TABLE_CUSTOM=y
 CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
 CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
@@ -400,6 +422,7 @@ CONFIG_COMPILER_OPTIMIZATION_SIZE=y
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
 # CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
 # CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
+# CONFIG_COMPILER_ASSERT_NDEBUG_EVALUATE is not set
 CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB=y
 CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
 # CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
@@ -410,14 +433,18 @@ CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
 # CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set
 # CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
 # CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
+# CONFIG_COMPILER_NO_MERGE_CONSTANTS is not set
 # CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
+# CONFIG_COMPILER_DISABLE_DEFAULT_ERRORS is not set
 # CONFIG_COMPILER_DISABLE_GCC12_WARNINGS is not set
 # CONFIG_COMPILER_DISABLE_GCC13_WARNINGS is not set
+# CONFIG_COMPILER_DISABLE_GCC14_WARNINGS is not set
 # CONFIG_COMPILER_DUMP_RTL_FILES is not set
 CONFIG_COMPILER_RT_LIB_GCCLIB=y
 CONFIG_COMPILER_RT_LIB_NAME="gcc"
 # CONFIG_COMPILER_ORPHAN_SECTIONS_WARNING is not set
 CONFIG_COMPILER_ORPHAN_SECTIONS_PLACE=y
+# CONFIG_COMPILER_STATIC_ANALYZER is not set
 # end of Compiler options
 
 #
@@ -449,7 +476,7 @@ CONFIG_BT_CONTROLLER_ENABLED=y
 #
 # Bluedroid Options
 #
-CONFIG_BT_BTC_TASK_STACK_SIZE=4096
+CONFIG_BT_BTC_TASK_STACK_SIZE=8192
 CONFIG_BT_BLUEDROID_PINNED_TO_CORE_0=y
 # CONFIG_BT_BLUEDROID_PINNED_TO_CORE_1 is not set
 CONFIG_BT_BLUEDROID_PINNED_TO_CORE=0
@@ -461,10 +488,20 @@ CONFIG_BT_ENC_KEY_SIZE_CTRL_VSC=y
 # CONFIG_BT_ENC_KEY_SIZE_CTRL_NONE is not set
 # CONFIG_BT_CLASSIC_BQB_ENABLED is not set
 CONFIG_BT_A2DP_ENABLE=y
+CONFIG_BT_AVRCP_ENABLED=y
+
+#
+# AVRCP Features
+#
+CONFIG_BT_AVRCP_CT_COVER_ART_ENABLED=y
+# end of AVRCP Features
+
 # CONFIG_BT_SPP_ENABLED is not set
 # CONFIG_BT_L2CAP_ENABLED is not set
+# CONFIG_BT_SDP_COMMON_ENABLED is not set
 # CONFIG_BT_HFP_ENABLE is not set
 # CONFIG_BT_HID_ENABLED is not set
+CONFIG_BT_GOEPC_ENABLED=y
 CONFIG_BT_BLE_ENABLED=y
 CONFIG_BT_GATTS_ENABLE=y
 # CONFIG_BT_GATTS_PPCP_CHAR_GAP is not set
@@ -485,6 +522,7 @@ CONFIG_BT_GATTC_CONNECT_RETRY_COUNT=3
 CONFIG_BT_BLE_SMP_ENABLE=y
 # CONFIG_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
 # CONFIG_BT_BLE_SMP_ID_RESET_ENABLE is not set
+CONFIG_BT_BLE_SMP_BOND_NVS_FLASH=y
 # CONFIG_BT_STACK_NO_LOG is not set
 
 #
@@ -672,8 +710,8 @@ CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT=30
 CONFIG_BT_MAX_DEVICE_NAME_LEN=32
 # CONFIG_BT_BLE_RPA_SUPPORTED is not set
 CONFIG_BT_BLE_RPA_TIMEOUT=900
-# CONFIG_BT_BLE_42_FEATURES_SUPPORTED is not set
 # CONFIG_BT_BLE_HIGH_DUTY_ADV_INTERVAL is not set
+# CONFIG_BT_ABORT_WHEN_ALLOCATION_FAILS is not set
 # end of Bluedroid Options
 
 #
@@ -682,6 +720,7 @@ CONFIG_BT_BLE_RPA_TIMEOUT=900
 # CONFIG_BTDM_CTRL_MODE_BLE_ONLY is not set
 CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=y
 # CONFIG_BTDM_CTRL_MODE_BTDM is not set
+CONFIG_BTDM_CTRL_BR_EDR_MIN_ENC_KEY_SZ_DFT=7
 CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN=2
 CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN=0
 # CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_HCI is not set
@@ -692,11 +731,16 @@ CONFIG_BTDM_CTRL_PCM_ROLE_MASTER=y
 # CONFIG_BTDM_CTRL_PCM_ROLE_SLAVE is not set
 CONFIG_BTDM_CTRL_PCM_POLAR_FALLING_EDGE=y
 # CONFIG_BTDM_CTRL_PCM_POLAR_RISING_EDGE is not set
+CONFIG_BTDM_CTRL_PCM_FSYNCSHP_STEREO_MODE=y
+# CONFIG_BTDM_CTRL_PCM_FSYNCSHP_MONO_MODE_LF is not set
+# CONFIG_BTDM_CTRL_PCM_FSYNCSHP_MONO_MODE_FF is not set
 CONFIG_BTDM_CTRL_PCM_ROLE_EFF=0
 CONFIG_BTDM_CTRL_PCM_POLAR_EFF=0
+CONFIG_BTDM_CTRL_PCM_FSYNCSHP_EFF=0
 CONFIG_BTDM_CTRL_LEGACY_AUTH_VENDOR_EVT=y
 CONFIG_BTDM_CTRL_LEGACY_AUTH_VENDOR_EVT_EFF=y
 CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=0
+CONFIG_BTDM_CTRL_BR_EDR_MIN_ENC_KEY_SZ_DFT_EFF=7
 CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=2
 CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0
 CONFIG_BTDM_CTRL_PINNED_TO_CORE_0=y
@@ -716,6 +760,14 @@ CONFIG_BTDM_CTRL_LPCLK_SEL_MAIN_XTAL=y
 
 CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1
 # CONFIG_BTDM_CTRL_SCAN_BACKOFF_UPPERLIMITMAX is not set
+# CONFIG_BTDM_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS is not set
+
+#
+# BLE disconnects when Instant Passed (0x28) occurs
+#
+# end of BLE disconnects when Instant Passed (0x28) occurs
+
+# CONFIG_BTDM_CTRL_CONTROLLER_DEBUG_MODE_1 is not set
 CONFIG_BTDM_RESERVE_DRAM=0xdb5c
 CONFIG_BTDM_CTRL_HLI=y
 # end of Controller Options
@@ -724,6 +776,7 @@ CONFIG_BTDM_CTRL_HLI=y
 # Common Options
 #
 CONFIG_BT_ALARM_MAX_NUM=50
+# CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED is not set
 # end of Common Options
 
 # CONFIG_BT_HCI_LOG_DEBUG_EN is not set
@@ -757,6 +810,7 @@ CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y
 #
 CONFIG_ADC_DISABLE_DAC=y
 # CONFIG_ADC_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_ADC_SKIP_LEGACY_CONFLICT_CHECK is not set
 
 #
 # Legacy ADC Calibration Configuration
@@ -772,42 +826,49 @@ CONFIG_ADC_CAL_LUT_ENABLE=y
 # Legacy DAC Driver Configurations
 #
 # CONFIG_DAC_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_DAC_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy DAC Driver Configurations
 
 #
 # Legacy MCPWM Driver Configurations
 #
 # CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_MCPWM_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy MCPWM Driver Configurations
 
 #
 # Legacy Timer Group Driver Configurations
 #
 # CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_GPTIMER_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy Timer Group Driver Configurations
 
 #
 # Legacy RMT Driver Configurations
 #
 # CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_RMT_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy RMT Driver Configurations
 
 #
 # Legacy I2S Driver Configurations
 #
 # CONFIG_I2S_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_I2S_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy I2S Driver Configurations
 
 #
 # Legacy PCNT Driver Configurations
 #
 # CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_PCNT_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy PCNT Driver Configurations
 
 #
 # Legacy SDM Driver Configurations
 #
 # CONFIG_SDM_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_SDM_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy SDM Driver Configurations
 # end of Driver Configurations
 
@@ -859,6 +920,7 @@ CONFIG_ADC_DISABLE_DAC_OUTPUT=y
 CONFIG_ESP_COEX_ENABLED=y
 CONFIG_ESP_COEX_SW_COEXIST_ENABLE=y
 # CONFIG_ESP_COEX_POWER_MANAGEMENT is not set
+# CONFIG_ESP_COEX_GPIO_DEBUG is not set
 # end of Wireless Coexistence
 
 #
@@ -897,6 +959,7 @@ CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM=y
 #
 # CONFIG_I2C_ISR_IRAM_SAFE is not set
 # CONFIG_I2C_ENABLE_DEBUG_LOG is not set
+# CONFIG_I2C_ENABLE_SLAVE_DRIVER_VERSION_2 is not set
 # end of ESP-Driver:I2C Configurations
 
 #
@@ -1004,6 +1067,13 @@ CONFIG_ESP_GDBSTUB_SUPPORT_TASKS=y
 CONFIG_ESP_GDBSTUB_MAX_TASKS=32
 # end of GDB Stub
 
+#
+# ESP HID
+#
+CONFIG_ESPHID_TASK_SIZE_BT=2048
+CONFIG_ESPHID_TASK_SIZE_BLE=4096
+# end of ESP HID
+
 #
 # ESP HTTP client
 #
@@ -1011,6 +1081,7 @@ CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
 # CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
 # CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH is not set
 # CONFIG_ESP_HTTP_CLIENT_ENABLE_CUSTOM_TRANSPORT is not set
+CONFIG_ESP_HTTP_CLIENT_EVENT_POST_TIMEOUT=2000
 # end of ESP HTTP client
 
 #
@@ -1023,6 +1094,7 @@ CONFIG_HTTPD_PURGE_BUF_LEN=32
 # CONFIG_HTTPD_LOG_PURGE_DATA is not set
 # CONFIG_HTTPD_WS_SUPPORT is not set
 # CONFIG_HTTPD_QUEUE_WORK_BLOCKING is not set
+CONFIG_HTTPD_SERVER_EVENT_POST_TIMEOUT=2000
 # end of HTTP Server
 
 #
@@ -1030,12 +1102,14 @@ CONFIG_HTTPD_PURGE_BUF_LEN=32
 #
 # CONFIG_ESP_HTTPS_OTA_DECRYPT_CB is not set
 # CONFIG_ESP_HTTPS_OTA_ALLOW_HTTP is not set
+CONFIG_ESP_HTTPS_OTA_EVENT_POST_TIMEOUT=2000
 # end of ESP HTTPS OTA
 
 #
 # ESP HTTPS server
 #
 # CONFIG_ESP_HTTPS_SERVER_ENABLE is not set
+CONFIG_ESP_HTTPS_SERVER_EVENT_POST_TIMEOUT=2000
 # end of ESP HTTPS server
 
 #
@@ -1060,6 +1134,12 @@ CONFIG_ESP_REV_MIN_FULL=0
 #
 CONFIG_ESP32_REV_MAX_FULL=399
 CONFIG_ESP_REV_MAX_FULL=399
+CONFIG_ESP_EFUSE_BLOCK_REV_MIN_FULL=0
+CONFIG_ESP_EFUSE_BLOCK_REV_MAX_FULL=99
+
+#
+# Maximum Supported ESP32 eFuse Block Revision (eFuse Block Rev v0.99)
+#
 # end of Chip revision
 
 #
@@ -1112,6 +1192,7 @@ CONFIG_PERIPH_CTRL_FUNC_IN_IRAM=y
 # Main XTAL Config
 #
 # CONFIG_XTAL_FREQ_26 is not set
+# CONFIG_XTAL_FREQ_32 is not set
 CONFIG_XTAL_FREQ_40=y
 # CONFIG_XTAL_FREQ_AUTO is not set
 CONFIG_XTAL_FREQ=40
@@ -1121,31 +1202,29 @@ CONFIG_ESP_SPI_BUS_LOCK_ISR_FUNCS_IN_IRAM=y
 # end of Hardware Settings
 
 #
-# LCD and Touch Panel
+# ESP-Driver:LCD Controller Configurations
 #
-
-#
-# LCD Touch Drivers are maintained in the IDF Component Registry
-#
-
-#
-# LCD Peripheral Configuration
-#
-CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
 # CONFIG_LCD_ENABLE_DEBUG_LOG is not set
-# end of LCD Peripheral Configuration
+# end of ESP-Driver:LCD Controller Configurations
-# end of LCD and Touch Panel
+
+#
+# ESP-MM: Memory Management Configurations
+#
+# end of ESP-MM: Memory Management Configurations
 
 #
 # ESP NETIF Adapter
 #
 CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120
+# CONFIG_ESP_NETIF_PROVIDE_CUSTOM_IMPLEMENTATION is not set
 CONFIG_ESP_NETIF_TCPIP_LWIP=y
 # CONFIG_ESP_NETIF_LOOPBACK is not set
 CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API=y
+CONFIG_ESP_NETIF_REPORT_DATA_TRAFFIC=y
 # CONFIG_ESP_NETIF_RECEIVE_REPORT_ERRORS is not set
 # CONFIG_ESP_NETIF_L2_TAP is not set
 # CONFIG_ESP_NETIF_BRIDGE_EN is not set
+# CONFIG_ESP_NETIF_SET_DNS_PER_DEFAULT_NETIF is not set
 # end of ESP NETIF Adapter
 
 #
@@ -1162,17 +1241,20 @@ CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
 CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20
 CONFIG_ESP_PHY_MAX_TX_POWER=20
 # CONFIG_ESP_PHY_REDUCE_TX_POWER is not set
+# CONFIG_ESP_PHY_ENABLE_CERT_TEST is not set
 CONFIG_ESP_PHY_RF_CAL_PARTIAL=y
 # CONFIG_ESP_PHY_RF_CAL_NONE is not set
 # CONFIG_ESP_PHY_RF_CAL_FULL is not set
 CONFIG_ESP_PHY_CALIBRATION_MODE=0
 # CONFIG_ESP_PHY_PLL_TRACK_DEBUG is not set
+# CONFIG_ESP_PHY_RECORD_USED_TIME is not set
 # end of PHY
 
 #
 # Power Management
 #
 # CONFIG_PM_ENABLE is not set
+CONFIG_PM_SLP_IRAM_OPT=y
 # end of Power Management
 
 #
@@ -1187,6 +1269,11 @@ CONFIG_ESP_PHY_CALIBRATION_MODE=0
 # CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set
 # end of ESP Ringbuf
 
+#
+# ESP Security Specific
+#
+# end of ESP Security Specific
+
 #
 # ESP System Settings
 #
@@ -1404,6 +1491,9 @@ CONFIG_FATFS_FS_LOCK=0
 CONFIG_FATFS_TIMEOUT_MS=10000
 CONFIG_FATFS_PER_FILE_CACHE=y
 # CONFIG_FATFS_USE_FASTSEEK is not set
+CONFIG_FATFS_USE_STRFUNC_NONE=y
+# CONFIG_FATFS_USE_STRFUNC_WITHOUT_CRLF_CONV is not set
+# CONFIG_FATFS_USE_STRFUNC_WITH_CRLF_CONV is not set
 CONFIG_FATFS_VFS_FSTAT_BLKSIZE=0
 # CONFIG_FATFS_IMMEDIATE_FSYNC is not set
 # CONFIG_FATFS_USE_LABEL is not set
@@ -1429,6 +1519,7 @@ CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536
 # CONFIG_FREERTOS_USE_TICK_HOOK is not set
 CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
 # CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY is not set
+CONFIG_FREERTOS_USE_TIMERS=y
 CONFIG_FREERTOS_TIMER_SERVICE_TASK_NAME="Tmr Svc"
 # CONFIG_FREERTOS_TIMER_TASK_AFFINITY_CPU0 is not set
 # CONFIG_FREERTOS_TIMER_TASK_AFFINITY_CPU1 is not set
@@ -1464,6 +1555,11 @@ CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y
 # CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
 # end of Port
 
+#
+# Extra
+#
+# end of Extra
+
 CONFIG_FREERTOS_PORT=y
 CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
 CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
@@ -1501,7 +1597,11 @@ CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS=y
 # end of Heap memory debugging
 
 #
-# Log output
+# Log
+#
+
+#
+# Log Level
 #
 # CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
 # CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
@@ -1514,11 +1614,29 @@ CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
 # CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
 # CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
 CONFIG_LOG_MAXIMUM_LEVEL=3
+
+#
+# Level Settings
+#
 # CONFIG_LOG_MASTER_LEVEL is not set
+CONFIG_LOG_DYNAMIC_LEVEL_CONTROL=y
+# CONFIG_LOG_TAG_LEVEL_IMPL_NONE is not set
+# CONFIG_LOG_TAG_LEVEL_IMPL_LINKED_LIST is not set
+CONFIG_LOG_TAG_LEVEL_IMPL_CACHE_AND_LINKED_LIST=y
+# CONFIG_LOG_TAG_LEVEL_CACHE_ARRAY is not set
+CONFIG_LOG_TAG_LEVEL_CACHE_BINARY_MIN_HEAP=y
+CONFIG_LOG_TAG_LEVEL_IMPL_CACHE_SIZE=31
+# end of Level Settings
+# end of Log Level
+
+#
+# Format
+#
 CONFIG_LOG_COLORS=y
 CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
 # CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
-# end of Log output
+# end of Format
+# end of Log
 
 #
 # LWIP
@@ -1557,6 +1675,8 @@ CONFIG_LWIP_ESP_MLDV6_REPORT=y
 CONFIG_LWIP_MLDV6_TMR_INTERVAL=40
 CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
 CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
+# CONFIG_LWIP_DHCP_DOES_ACD_CHECK is not set
+# CONFIG_LWIP_DHCP_DOES_NOT_CHECK_OFFERED_IP is not set
 # CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
 CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y
 # CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
@@ -1571,6 +1691,7 @@ CONFIG_LWIP_DHCPS=y
 CONFIG_LWIP_DHCPS_LEASE_UNIT=60
 CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
 CONFIG_LWIP_DHCPS_STATIC_ENTRIES=y
+CONFIG_LWIP_DHCPS_ADD_DNS=y
 # end of DHCP server
 
 # CONFIG_LWIP_AUTOIP is not set
@@ -1629,9 +1750,12 @@ CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
 # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
 # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
 CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
-# CONFIG_LWIP_PPP_SUPPORT is not set
 CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
 CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
+CONFIG_LWIP_IPV6_ND6_NUM_PREFIXES=5
+CONFIG_LWIP_IPV6_ND6_NUM_ROUTERS=3
+CONFIG_LWIP_IPV6_ND6_NUM_DESTINATIONS=10
+# CONFIG_LWIP_PPP_SUPPORT is not set
 # CONFIG_LWIP_SLIP_SUPPORT is not set
 
 #
@@ -1661,8 +1785,10 @@ CONFIG_LWIP_SNTP_MAXIMUM_STARTUP_DELAY=5000
 #
 # DNS
 #
+CONFIG_LWIP_DNS_MAX_HOST_IP=1
 CONFIG_LWIP_DNS_MAX_SERVERS=3
 # CONFIG_LWIP_FALLBACK_DNS_SERVER_SUPPORT is not set
+# CONFIG_LWIP_DNS_SETSERVER_WITH_NETIF is not set
 # end of DNS
 
 CONFIG_LWIP_BRIDGEIF_MAX_PORTS=7
@@ -1686,6 +1812,8 @@ CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE=y
 CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
 # CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
 # CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
+CONFIG_LWIP_HOOK_DNS_EXT_RESOLVE_NONE=y
+# CONFIG_LWIP_HOOK_DNS_EXT_RESOLVE_CUSTOM is not set
 CONFIG_LWIP_HOOK_IP6_INPUT_NONE=y
 # CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT is not set
 # CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM is not set
@@ -1744,6 +1872,7 @@ CONFIG_MBEDTLS_HAVE_TIME=y
 # CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
 CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
 CONFIG_MBEDTLS_SHA512_C=y
+CONFIG_MBEDTLS_SHA3_C=y
 CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
 # CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
 # CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
@@ -1797,6 +1926,8 @@ CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
 # end of Certificates
 
 CONFIG_MBEDTLS_ECP_C=y
+CONFIG_MBEDTLS_PK_PARSE_EC_EXTENDED=y
+CONFIG_MBEDTLS_PK_PARSE_EC_COMPRESSED=y
 # CONFIG_MBEDTLS_DHM_C is not set
 CONFIG_MBEDTLS_ECDH_C=y
 CONFIG_MBEDTLS_ECDSA_C=y
@@ -1820,6 +1951,7 @@ CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM=y
 # CONFIG_MBEDTLS_HKDF_C is not set
 # CONFIG_MBEDTLS_THREADING_C is not set
 CONFIG_MBEDTLS_ERROR_STRINGS=y
+CONFIG_MBEDTLS_FS_IO=y
 # end of mbedTLS
 
 #
@@ -1867,25 +1999,10 @@ CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=y
 # CONFIG_OPENTHREAD_ENABLED is not set
 
 #
-# Thread Operational Dataset
+# OpenThread Spinel
 #
-CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP"
-CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX="fd00:db8:a0:0::/64"
-CONFIG_OPENTHREAD_NETWORK_CHANNEL=15
-CONFIG_OPENTHREAD_NETWORK_PANID=0x1234
-CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe"
-CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff"
-CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53"
-# end of Thread Operational Dataset
-
-CONFIG_OPENTHREAD_XTAL_ACCURACY=130
 # CONFIG_OPENTHREAD_SPINEL_ONLY is not set
-# CONFIG_OPENTHREAD_RX_ON_WHEN_IDLE is not set
+# end of OpenThread Spinel
-
-#
-# Thread Address Query Config
-#
-# end of Thread Address Query Config
 # end of OpenThread
 
 #
@@ -1894,6 +2011,7 @@ CONFIG_OPENTHREAD_XTAL_ACCURACY=130
 CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0=y
 CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1=y
 CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2=y
+CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_PATCH_VERSION=y
 # end of Protocomm
 
 #
@@ -1936,6 +2054,7 @@ CONFIG_SPI_FLASH_BROWNOUT_RESET=y
 # Features here require specific hardware (READ DOCS FIRST!)
 #
 CONFIG_SPI_FLASH_SUSPEND_TSUS_VAL_US=50
+# CONFIG_SPI_FLASH_FORCE_ENABLE_XMC_C_SUSPEND is not set
 # end of Optional and Experimental Features (READ DOCS FIRST)
 # end of Main Flash configuration
 
@@ -2065,6 +2184,8 @@ CONFIG_VFS_MAX_COUNT=8
 #
 CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
 # end of Host File System I/O (Semihosting)
+
+CONFIG_VFS_INITIALIZE_DEV_NULL=y
 # end of Virtual file system
 
 #
@@ -2082,6 +2203,7 @@ CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
 CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
 # CONFIG_WIFI_PROV_BLE_BONDING is not set
 # CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set
+# CONFIG_WIFI_PROV_BLE_NOTIFY is not set
 # CONFIG_WIFI_PROV_KEEP_BLE_ON_AFTER_PROV is not set
 CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y
 # CONFIG_WIFI_PROV_STA_FAST_SCAN is not set
@@ -2247,7 +2369,7 @@ CONFIG_LV_ATTRIBUTE_MEM_ALIGN_SIZE=1
 # Enable built-in fonts
 #
 CONFIG_LV_FONT_MONTSERRAT_8=y
-# CONFIG_LV_FONT_MONTSERRAT_10 is not set
+CONFIG_LV_FONT_MONTSERRAT_10=y
 CONFIG_LV_FONT_MONTSERRAT_12=y
 CONFIG_LV_FONT_MONTSERRAT_14=y
 # CONFIG_LV_FONT_MONTSERRAT_16 is not set
@@ -2276,7 +2398,7 @@ CONFIG_LV_FONT_UNSCII_16=y
 # end of Enable built-in fonts
 
 # CONFIG_LV_FONT_DEFAULT_MONTSERRAT_8 is not set
-# CONFIG_LV_FONT_DEFAULT_MONTSERRAT_10 is not set
+CONFIG_LV_FONT_DEFAULT_MONTSERRAT_10=y
 # CONFIG_LV_FONT_DEFAULT_MONTSERRAT_12 is not set
 # CONFIG_LV_FONT_DEFAULT_MONTSERRAT_14 is not set
 # CONFIG_LV_FONT_DEFAULT_MONTSERRAT_16 is not set
@@ -2300,7 +2422,7 @@ CONFIG_LV_FONT_UNSCII_16=y
 # CONFIG_LV_FONT_DEFAULT_DEJAVU_16_PERSIAN_HEBREW is not set
 # CONFIG_LV_FONT_DEFAULT_SIMSUN_14_CJK is not set
 # CONFIG_LV_FONT_DEFAULT_SIMSUN_16_CJK is not set
-CONFIG_LV_FONT_DEFAULT_UNSCII_8=y
+# CONFIG_LV_FONT_DEFAULT_UNSCII_8 is not set
 # CONFIG_LV_FONT_DEFAULT_UNSCII_16 is not set
 # CONFIG_LV_FONT_FMT_TXT_LARGE is not set
 # CONFIG_LV_USE_FONT_COMPRESSED is not set
@@ -2515,7 +2637,7 @@ CONFIG_ESP32_APPTRACE_DEST_NONE=y
 CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
 CONFIG_BLUEDROID_ENABLED=y
 # CONFIG_NIMBLE_ENABLED is not set
-CONFIG_BTC_TASK_STACK_SIZE=4096
+CONFIG_BTC_TASK_STACK_SIZE=8192
 CONFIG_BLUEDROID_PINNED_TO_CORE_0=y
 # CONFIG_BLUEDROID_PINNED_TO_CORE_1 is not set
 CONFIG_BLUEDROID_PINNED_TO_CORE=0
@@ -2811,8 +2933,6 @@ CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
 CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
 CONFIG_ESP32_WIFI_TX_BA_WIN=6
 CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
-CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
-CONFIG_ESP32_WIFI_RX_BA_WIN=6
 CONFIG_ESP32_WIFI_RX_BA_WIN=6
 CONFIG_ESP32_WIFI_NVS_ENABLED=y
 CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y